Unimec TP 10012 Trapezoidal Screw Jack Render

  • Unimec TP 10012 Trapezoidal Screw Jack Render

Unimec TP 10012 Trapezoidal Screw Jack Render

Code: TP 10012
Brand: Unimec


Material Normative Specification Indications
Worm 16NiCr4 EN 10084:2008 Casehardening alloy steel Casehardened and ground on teeth and holds
Worn wheel CuAl10Fe2-GZ EN 1982:2008 Alluminium bronze Centrifuged
Threaded spindle C45 EN 10083-2:2006 Carbon steel Tr 100x12 (ISO 2901:2016) - Rolled or machined
Carter S235 J0 EN 10025-2:2005 Welded carbon steel Completely machined on 6 faces
Lubricant Unimec Mark CA Calcium based grease 3,7 kg

General features

Operating temperature [°C] -10 °C / 80 °C
Static load (traction or compression) 600 kN
Dynamic load (traction or compression) 400 kN
Maximum input speed 1800 rpm
Main gearbox weight 180 kg
Trapezoidal screw weight 56 kg/m
Anti-rotation torque at maximum load 3030 Nm
Maximum admissible static lateral loads 8 kN
Center-to-center diameter 140 mm
Maximum radial load on worm 2,5 kN
Standard working conditions 25 °C - servizio 10%

Specific features

Nominal ratios
1/10 1/30
Real ratio 1/10,33 1/30
Translation per worm revolution 1,16 mm 0,4 mm
Efficiency 18 % 12 %
Start-up efficiency 12 % 8 %
Maximum linear speed 1200 720
Torque at maximum load 425 Nm 210 Nm
Worm screw maximum torque 5200 Nm 4400 Nm
Idle torque 3,95 Nm 3 Nm

Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]

Construction forms

Forma S

Forma B

Forma D

Unimec Datasheets

Country & Language File Name Download Link
United States (English) Unimec-EN_59050.pdf Download
Deutschland (Deutsch) Unimec-DE_13807.pdf Download
Italy (Italiano) Unimec-IT_75906.pdf Download
中国(简体 Unimec-CN_95426.pdf Download

Request a Quote