Unimec Trapezoidal Screw Jack Model TP 8010 Render
Unimec Trapezoidal Screw Jack Model TP 8010 Render
Kod: TP 8010
Marka: Unimec
Materials
Material | Normative | Specification | Indications | |
---|---|---|---|---|
Worm | 16NiCr4 | EN 10084:2008 | Casehardening alloy steel | Casehardened and ground on teeth and holds |
Worn wheel | CuAl10Fe2-GM | EN 1982:2008 | Alluminium bronze | Chill molded |
Threaded spindle | C45 | EN 10083-2:2006 | Carbon steel | Tr 80x10 (ISO 2901:2016) - Rolled or machined |
Carter | GJL 250 | EN 1561:2011 | Grey cast iron | Completely machined on 6 faces |
Lubricant | Unimec Mark CA | Calcium based grease | 2 kg |
General features
Static load (traction or compression) | 350 kN |
---|---|
Dynamic load (traction or compression) | 250 kN |
Maximum input speed | 1800 rpm |
Main gearbox weight | 62 kg |
Trapezoidal screw weight | 37 kg/m |
Anti-rotation torque at maximum load | 1530 Nm |
Maximum admissible static lateral loads | 4 kN |
Center-to-center diameter | 90 mm |
Maximum radial load on worm | 900 N |
Standard working conditions | 25 °C - servizio 10% |
Specific features
Nominal ratios | |||
---|---|---|---|
1/5 | 1/10 | 1/30 | |
Real ratio | 1/5,2 | 1/9,67 | 1/30 |
Translation per worm revolution | 1,92 mm | 1,03 mm | 0,33 mm |
Efficiency | 22 % | 20 % | 14 % |
Start-up efficiency | 14 % | 13 % | 9 % |
Maximum linear speed | 2000 | 1500 | 600 |
Torque at maximum load | 360 Nm | 200 Nm | 95 Nm |
Worm screw maximum torque | 850 Nm | 850 Nm | 490 Nm |
Idle torque | 3,5 Nm | 2,7 Nm | 1,95 Nm |
Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]
![](https://www.unimec.eu/images/MAR-PROD/8010/max800_Eulero_8010.jpg)
![](https://www.unimec.eu/images/MAR-PROD/Eulero/max800_Eulero_1.jpg)
![](https://www.unimec.eu/images/MAR-PROD/Eulero/max800_Eulero_2-.jpg)
![](https://www.unimec.eu/images/MAR-PROD/Eulero/max800_Eulero_3-.jpg)
Power curves
The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]
![](https://www.unimec.eu/images/MAR-PROD/8010/max800_8010-1_5.jpg)
![](https://www.unimec.eu/images/MAR-PROD/8010/max800_8010-1_10.jpg)
![](https://www.unimec.eu/images/MAR-PROD/8010/max800_8010-1_30.jpg)
Unimec Veri Sayfaları
Ülke ve Dil | Dosya Adı | İndirme Bağlantısı |
Unimec-EN_59050.pdf | İndir | |
Unimec-DE_13807.pdf | İndir | |
Unimec-IT_75906.pdf | İndir | |
Unimec-CN_95426.pdf | İndir |
Satış İletişim
Bizi Telefonumuzdan veya E-Posta ile 7/24 arayın. İş günleri içinde size kısa sürede geri döneceğiz.
İletişim & Destek
Teklif İste