Unimec RX 86 Bevel Gearbox
Unimec RX 86 Bevel Gearbox
Kod: RX 86
Marka: Unimec
Materials
Material | Normative | Specification | Indications | |
---|---|---|---|---|
Hub shaft | C45 | EN 10083-2:2006 | Carbon steel | |
Carter | GJL 250 | EN 1561:2011 | Grey cast iron | Completely machined on 6 faces |
Bevel gears | 17NiCrMo 6-4 | EN 10084:2008 | Casehardening alloy steel | Ground bores and planes. Gleason gears run by pair. |
Lubricant | Unimec Atir SH150 | Synthetic oil | 0,1 lt |
General features
Gear backlash | 15' - 20' |
---|---|
Forced lubrication speed | 3000 rpm |
Grease lubrication speed | 100 rpm |
Operating temperature [°C] | -10 °C / 80 °C |
Maximum input speed | 4500 rpm |
Main gearbox weight | 6,5 kg |
Specific features
Nominal ratios | |||||
---|---|---|---|---|---|
1/1 | 1/1,5 | 1/2 | 1/3 | 1/4 | |
Phase between keys | +/- 6,5° | +/- 6° | +/- 6° | +/- 6° | +/- 4,5° |
Inertia moment | 366 kg-mm2 | 136 kg-mm2 | 74 kg-mm2 | 37 kg-mm2 | 26 kg-mm2 |
Power curves
The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
S = Rotational speed of the fast/slow shaft [rpm]
CL = Slow shaft torque [Nm]
P = requested input power [kW]
![](https://www.unimec.eu/images/RIN-PROD/86/max800_86-potenza-1.jpg)
![](https://www.unimec.eu/images/RIN-PROD/86/max800_86-potenza-2.jpg)
Max admissible loads
Admissible loads
S = Fast shaft rotational speed [rpm]
RL = Admissible radial load [kN]
AL = Admissible axial load [kN]
HS = Hub shaft
RHS = reinforced hub shaft
PS = Solid protruding shaft
![](https://www.unimec.eu/images/RIN-PROD/86/max800_86-carico-1.jpg)
![](https://www.unimec.eu/images/RIN-PROD/86/max800_86-carico-2.jpg)
Unimec Veri Sayfaları
Ülke ve Dil | Dosya Adı | İndirme Bağlantısı |
Unimec-EN_59050.pdf | İndir | |
Unimec-DE_13807.pdf | İndir | |
Unimec-IT_75906.pdf | İndir | |
Unimec-CN_95426.pdf | İndir |
Satış İletişim
Bizi Telefonumuzdan veya E-Posta ile 7/24 arayın. İş günleri içinde size kısa sürede geri döneceğiz.
İletişim & Destek
Teklif İste