Unimec TP 630 Technopolymer Screw Jack

  • Unimec TP 630 Technopolymer Screw Jack

Unimec TP 630 Technopolymer Screw Jack

코드: TP 630
브랜드: Unimec

Materials

Material Normative Specification Indications
Worm 16NiCr4 EN 10084:2008 Casehardening alloy steel Casehardened and ground on teeth and holds
Threaded spindle C45 EN 10083-2:2006 Carbon steel Tr 30x6 (ISO 2901:2016) - Rolled or machined
Carter Technopolymer Polyarylamide Made by 2 half-shell
Worn wheel Technopolymer Polyarylamide Glass fiber reinforced

General features

Operating temperature [°C] -20 °C / 50 °C
Static load (traction or compression) 18 kN
Dynamic load (traction or compression) 10 kN
Maximum input speed 1800 rpm
Main gearbox weight 2,7 kg
Trapezoidal screw weight 5 kg/m
Anti-rotation torque at maximum load 63 Nm
Maximum admissible static lateral loads 0 N
Center-to-center diameter 50 mm
Maximum radial load on worm 450 N
Standard working conditions 25 °C - servizio 10%

Specific features

Nominal ratios
1/5 1/10 1/30
Real ratio 1/4,75 1/9,67 1/30
Translation per worm revolution 1,26 mm 0,62 mm 0,2 mm
Efficiency 30 % 26 % 18 %
Start-up efficiency 21 % 18 % 13 %
Maximum linear speed 2160 1080 360
Torque at maximum load 16 Nm 9,3 Nm 4,4 Nm
Worm screw maximum torque 69 Nm 154 Nm 183 Nm
Idle torque 0,4 Nm 0,3 Nm 0,25 Nm

Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]

Unimec 데이터 시트

국가 및 언어 파일 이름 다운로드 링크
United States (English) Unimec-EN_59050.pdf 다운로드
Deutschland (Deutsch) Unimec-DE_13807.pdf 다운로드
Italy (Italiano) Unimec-IT_75906.pdf 다운로드
中国(简体 Unimec-CN_95426.pdf 다운로드

견적 요청

Top