Unimec TPR-00306 Reducer
Unimec TPR-00306 Reducer
Code: TPR-00306
Marque: Unimec
Materials
| material | Normative | Specification | Indications | |
|---|---|---|---|---|
| Worm | 16NiCr4 | EN 10084: 2008 | Case hardening alloy steel | Casehardened and ground on teeth and holds |
| Worn wheel | CuAl10Fe2-GM | EN 1982: 2008 | Aluminum bronze | Chill molded |
| Threaded spindle | C45 | EN 10083-2: 2006 | Carbon steel | Tr 30x6 (ISO 2901: 2016) - Rolled or machined |
| Carter | GJL 250 | EN 1561: 2011 | Gray cast iron | Completely machined on 6 faces |
| Lubricant | Unimec Mark CA | Calcium based grease | 0.3 kg |
General features
| Operating temperature [C] | -10 C / 80 C |
|---|---|
| Static load (traction or compression) | 40 kN |
| Dynamic load (traction or compression) | 25 kN |
| Maximum input speed | 1800 rpm |
| Main gearbox weight | 10 kg |
| Trapezoidal screw weight | 5 kg / m |
| Anti-rotation torque at maximum load | 63 Nm |
| Maximum admissible static lateral loads | 0 N |
| Center-to-center diameter | 50 mm |
| Maximum radial load on worm | 450 N |
| Standard working conditions | 25 C - servizio 10% |
Specific features
| Nominal ratios | |||
|---|---|---|---|
| 1/5 | 1/10 | 1/30 | |
| Real ratio | 1 / 4.75 | 1 / 9.67 | 1/30 |
| Translation per worm revolution | 1.26 mm | 0.62 mm | 0.2 mm |
| Efficiency | 30% | 26% | 18% |
| Start-up efficiency | 21% | 18% | 13% |
| Maximum linear speed | 2160 | 1080 | 360 |
| Torque at maximum load | 16 Nm | 9.3 Nm | 4.4 Nm |
| Worm screw maximum torque | 69 Nm | 154 Nm | 183 Nm |
| Idle torque | 0.4 Nm | 0.3 Nm | 0.25 Nm |
Unimec Fiches techniques
| Pays et langue | Nom du fichier | Lien de téléchargement |
 United States (English) |
Unimec-EN_59050.pdf | Télécharger |
 Deutschland (Deutsch) |
Unimec-DE_13807.pdf | Télécharger |
 Italy (Italiano) |
Unimec-IT_75906.pdf | Télécharger |
 中国（简体 |
Unimec-CN_95426.pdf | Télécharger |
Demande de devis