TP-09010 B RAPP:1/30 Screw Jack
TP-09010 B RAPP:1/30 Screw Jack
Código: TP-09010 B RAPP:1/30
Marca: Unimec
Materials
| Material | Normative | Specification | Indications | |
|---|---|---|---|---|
| Worm | 16NiCr4 | EN 10084:2008 | Casehardening alloy steel | Casehardened and ground on teeth and holds |
| Worn wheel | CuAl10Fe2-GZ | EN 1982:2008 | Alluminium bronze | Centrifuged |
| Threaded spindle | C45 | EN 10083-2:2006 | Carbon steel | Tr 100x12 (ISO 2901:2016) - Rolled or machined |
| Carter | GJL 250 | EN 1561:2011 | Grey cast iron | Completely machined on 6 faces |
| Lubricant | Unimec Mark CA | Calcium based grease | 2,3 kg |
General features
| Operating temperature [°C] | -10 °C / 80 °C |
|---|---|
| Static load (traction or compression) | 500 kN |
| Dynamic load (traction or compression) | 350 kN |
| Maximum input speed | 1800 rpm |
| Main gearbox weight | 110 kg |
| Trapezoidal screw weight | 56 kg/m |
| Anti-rotation torque at maximum load | 2650 Nm |
| Maximum admissible static lateral loads | 8 kN |
| Center-to-center diameter | 110 mm |
| Maximum radial load on worm | 1 kN |
| Standard working conditions | 25 °C - servizio 10% |
Specific features
| Nominal ratios | ||
|---|---|---|
| 1/10 | 1/30 | |
| Real ratio | 1/10 | 1/30 |
| Translation per worm revolution | 1,2 mm | 0,4 mm |
| Efficiency | 18 % | 12 % |
| Start-up efficiency | 12 % | 8 % |
| Maximum linear speed | 1800 | 720 |
| Torque at maximum load | 370 Nm | 185 Nm |
| Worm screw maximum torque | 2000 Nm | 2000 Nm |
| Idle torque | 3,25 Nm | 2,3 Nm |
Euler's law (safety factor =2; dynamic compression load)
Limit Load 1 (red) - 2 (blue) - 3 (green)
C = Load [kN]
L = Overall trapezoidal screw length [mm]
![](\"https://www.unimec.eu/images/MAR-PROD/9010/Eulero_9010.jpg\")
![](\"https://www.unimec.eu/images/MAR-PROD/Eulero/Eulero_1.jpg\")
![](\"https://www.unimec.eu/images/MAR-PROD/Eulero/Eulero_2-.jpg\")
![](\"https://www.unimec.eu/images/MAR-PROD/Eulero/Eulero_3-.jpg\")
Power curves
The magenta zone indicates a potential heating risk. Working cycles must be carefully analized.
VR = Worm rotational speed [rpm]
VL = Spindle translation speed [mm/min]
P = Requested input power [kW]
![](\"https://www.unimec.eu/images/MAR-PROD/9010/9010-1_10.jpg\")
![](\"https://www.unimec.eu/images/MAR-PROD/9010/9010-1_30.jpg\")
Unimec Hojas de Datos
| País e Idioma | Nombre del Archivo | Enlace de Descarga |
 United States (English) |
Unimec-EN_59050.pdf | Descargar |
 Deutschland (Deutsch) |
Unimec-DE_13807.pdf | Descargar |
 Italy (Italiano) |
Unimec-IT_75906.pdf | Descargar |
 中国（简体 |
Unimec-CN_95426.pdf | Descargar |
Solicitar una Cotización