Helmholz 800-600-1AA11 Handling blocks for CAN
Helmholz 800-600-1AA11 Handling blocks for CAN
Code: 800-600-1AA11
Brand: Helmholz
Parameterization tool CANParam
The CAN modules are configured on the PC with the parameterization tool CANParam (included in the software package 800-600-1AA11). This means the communication parameters can be easily set. The parameters for a module can be stored in a project on the PC.
The CAN modules support both the protocol format CAN 2.0A (11 bit) and CAN 2.0B (29 bit).
Acceptance masks are available in the CAN modules. Using these masks, it is possible to activate or block various telegram IDs for reception.
Express masks filter high-priority CAN telegrams to pass them directly to the PLC.
For time-dependent events, such as the SYNC frame in CANopen, up to 16 timers with a resolution of up to 1 ms are available in the CAN modules. Each timer can transmit any CAN telegram. The timers can be started, stopped, and changed from the PLC.
In addition, synchronized transmission of CAN messages can be enabled. With this, a time window in which all data will be transmitted synchronously is specified.
Using freely programmable scripts, upon certain events, such as "Power ON” or “PLC Stop -> Run”, CAN frames can be sent or timers started.
An integrated diagnostic function facilitates troubleshooting during commissioning of the module.
For the CANopen master function of the CAN 300 PRO, the behavior of the master can be defined and the slaves that exist in the CAN bus can be parameterized.
To simplify configuration, the CANParam software can read in the EDS files from CANopen slaves.
Handling blocks
The CAN modules are entered in the hardware configurator of the programming software as CP module (CAN 300, CAN 300 PRO) or as FM module (CAN 400) and addressed in the STEP* 7 program / ??TIA Portal* using handling blocks.
For the CAN modules, handling blocks are available for Layer 2 communication and for the CANopen master (DS301 V4).
For use of the CAN modules as CANopen slaves, handling for the profiles DS401 (I/O modules) and DS420 (Corrugator) is available. Additional profiles can be prepared on request.
Application examples for control of drives according to profile DS402 are also available.
Furthermore, handling blocks for the application of the CAN 300 PRO as a DeviceNet slave are available.
General information | ||
---|---|---|
Order number | 800-600-1AA11 | |
Article name | Handling blocks for CAN | |
Scope of delivery | CD with parameterization software “CANParam”, handling blocks “Layer 2”, “CANopen®” and “SAE J1939” |
Helmholz Datasheets
Country & Language | File Name | Download Link |
Helmholz-EN_42334.pdf | Download |
Contact Sales
Drop us a call on our Phone or by E-Mail with 24/7 basis. We will get back to you shortly in business days.
Contact & Support
Request a Quote