Stego CSF 028 | 250 W, 400 W Fan Heater
Stego CSF 028 | 250 W, 400 W Fan Heater
代码: CSF 028 | 250 W, 400 W
品牌: Stego
Heating element | PTC resistor - temperature limiting |
---|---|
Temperature safety cut-out | to protect against overheating in case of fan failure, automatic reset |
Axial fan, ball bearing | air flow, free flow CSF 028: 45m³/h (230VAC), 54m³/h (120VAC) service life 40,000h at +40°C (+104°F) |
Connection | 2-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
Casing | plastic according to UL94 V-0, black |
Mounting | clip for 35mm DIN rail, EN 60715 or screw fixing (Ø 5.5mm), clamping torque 2Nm max., washers have to be used |
Fitting position | vertical airflow (air outlet up) |
Dimensions | models with clip fixing: 105 x 85 x 118mm, models with screw flange fixing: 105 x 115 x 108mm |
Weight | 0.5kg |
Operating/Storage temperature | -40 to +70°C (-40 to +158°F)/-45 to +70°C (-49 to +158°F) |
Operating/Storage humidity | max. 90% RH (non-condensing) |
Protection type/Protection class | IP20 / II (double insulated) |
Art. No. clip fixing | Art. No. screw flange fixing | Operating voltage | Heating capacity¹ | Inrush current max. | Recommended pre-fuse T (time-delay) |
Switch-off temperature² | Switch-on temperature² | Approvals |
||
---|---|---|---|---|---|---|---|---|---|---|
02821.0-06 | 02821.0-08 | 230VAC, 50/60Hz | 250W | 9.0A | 10.0A | +15°C (+59°F) | +5°C (+41°F) | VDE | UL File No. E234324 | EAC |
02821.0-09 | 02821.0-11 | 230VAC, 50/60Hz | 250W | 9.0A | 10.0A | +25°C (+77°F) | +15°C (+59°F) | VDE | UL File No. E234324 | EAC |
02820.0-06 | 02820.0-08 | 230VAC, 50/60Hz | 400W | 15.0A | 16.0A | +15°C (+59°F) | +5°C (+41°F) | VDE | UL File No. E234324 | EAC |
02820.0-09 | 02820.0-11 | 230VAC, 50/60Hz | 400W | 15.0A | 16.0A | +25°C (+77°F) | +15°C (+59°F) | VDE | UL File No. E234324 | EAC |
02821.9-06 | 02821.9-08 | 120VAC, 50/60Hz | 250W | 6.0A | 10.0A | +15°C (+59°F) | +5°C (+41°F) | - | UL File No. E234324 | EAC |
02821.9-09 | 02821.9-11 | 120VAC, 50/60Hz | 250W | 6.0A | 10.0A | +25°C (+77°F) | +15°C (+59°F) | - | UL File No. E234324 | EAC |
02820.9-06 | 02820.9-08 | 120VAC, 50/60Hz | 400W | 9.0A | 10.0A | +15°C (+59°F) | +5°C (+41°F) | - | UL File No. E234324 | EAC |
02820.9-09 | 02820.9-11 | 120VAC, 50/60Hz | 400W | 9.0A | 10.0A | +25°C (+77°F) | +15°C (+59°F) | - | UL File No. E234324 | EAC |
¹ at +20°C (+68°F) ambient temperature; ² tolerance of ±5K
Note: Other switch-off and switch-on temperatures on request.
ACCESSORIES
Air duct for improved heat distribution
The air duct is an accessory part for use with the fan heater CSF 028. It can easily be clipped onto the protective grille of the fan heater without use of any tools, and diverts the exiting warm air by 45°. This results in an overall improved heat distribution within an enclosure or cabinet. The temperature above the protective grille is reduced by up to 20 °C (measured 100 mm above protective grille) and may make the use of a heat conduction plate obsolete.
Art. No. | Dimensions² | Plastic | 1 Packing unit | Weight (approx.) |
---|---|---|---|---|
252017 | 85 x 85 x 12 mm | according to UL94 V-0, black | 1 piece | 35 g |
² Dimensions when mounted on fan heater.
TECHNICAL DRAWINGS - CLIP FIXING
SCREW FLANGE FIXING
Stego 资料表
国家和语言 | 文件名 | 下载链接 |
United States (English) | stego-EN_54310.pdf | 下载 |
Deutschland (Deutsch) | stego-DE_71351.pdf | 下载 |
Italy (Italiano) | stego-IT_60429.pdf | 下载 |
请求报价