Stego CSF 028 | 250 W, 400 W Fan Heater

Home Stego Stego CSF 028 | 250 W, 400 W Fan Heater

Stego CSF 028 | 250 W, 400 W Fan Heater

Codice: CSF 028 | 250 W, 400 W

Marchio: Stego

Heating element	PTC resistor - temperature limiting
Temperature safety cut-out	to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing	air flow, free flow CSF 028: 45m³/h (230VAC), 54m³/h (120VAC) service life 40,000h at +40°C (+104°F)
Connection	2-pole dual pressure clamp for rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²
Casing	plastic according to UL94 V-0, black
Mounting	clip for 35mm DIN rail, EN 60715 or screw fixing (Ø 5.5mm), clamping torque 2Nm max., washers have to be used
Fitting position	vertical airflow (air outlet up)
Dimensions	models with clip fixing: 105 x 85 x 118mm, models with screw flange fixing: 105 x 115 x 108mm
Weight	0.5kg
Operating/Storage temperature	-40 to +70°C (-40 to +158°F)/-45 to +70°C (-49 to +158°F)
Operating/Storage humidity	max. 90% RH (non-condensing)
Protection type/Protection class	IP20 / II (double insulated)

Art. No. clip fixing	Art. No. screw flange fixing	Operating voltage	Heating capacity¹	Inrush current max.	Recommended pre-fuse T (time-delay)	Switch-off temperature²	Switch-on temperature²	Approvals
02821.0-06	02821.0-08	230VAC, 50/60Hz	250W	9.0A	10.0A	+15°C (+59°F)	+5°C (+41°F)	VDE	UL File No. E234324	EAC
02821.0-09	02821.0-11	230VAC, 50/60Hz	250W	9.0A	10.0A	+25°C (+77°F)	+15°C (+59°F)	VDE	UL File No. E234324	EAC
02820.0-06	02820.0-08	230VAC, 50/60Hz	400W	15.0A	16.0A	+15°C (+59°F)	+5°C (+41°F)	VDE	UL File No. E234324	EAC
02820.0-09	02820.0-11	230VAC, 50/60Hz	400W	15.0A	16.0A	+25°C (+77°F)	+15°C (+59°F)	VDE	UL File No. E234324	EAC
02821.9-06	02821.9-08	120VAC, 50/60Hz	250W	6.0A	10.0A	+15°C (+59°F)	+5°C (+41°F)	-	UL File No. E234324	EAC
02821.9-09	02821.9-11	120VAC, 50/60Hz	250W	6.0A	10.0A	+25°C (+77°F)	+15°C (+59°F)	-	UL File No. E234324	EAC
02820.9-06	02820.9-08	120VAC, 50/60Hz	400W	9.0A	10.0A	+15°C (+59°F)	+5°C (+41°F)	-	UL File No. E234324	EAC
02820.9-09	02820.9-11	120VAC, 50/60Hz	400W	9.0A	10.0A	+25°C (+77°F)	+15°C (+59°F)	-	UL File No. E234324	EAC

¹ at +20°C (+68°F) ambient temperature; ² tolerance of ±5K
Note: Other switch-off and switch-on temperatures on request.

ACCESSORIES

Air duct for improved heat distribution

The air duct is an accessory part for use with the fan heater CSF 028. It can easily be clipped onto the protective grille of the fan heater without use of any tools, and diverts the exiting warm air by 45°. This results in an overall improved heat distribution within an enclosure or cabinet. The temperature above the protective grille is reduced by up to 20 °C (measured 100 mm above protective grille) and may make the use of a heat conduction plate obsolete.

Art. No.	Dimensions²	Plastic	1 Packing unit	Weight (approx.)
252017	85 x 85 x 12 mm	according to UL94 V-0, black	1 piece	35 g

² Dimensions when mounted on fan heater.

TECHNICAL DRAWINGS - CLIP FIXING

SCREW FLANGE FIXING

Stego Datasheet

Paese e lingua	Nome del file	Link di download
United States (English)	stego-EN_54310.pdf	Download
Deutschland (Deutsch)	stego-DE_71351.pdf	Download
Italy (Italiano)	stego-IT_60429.pdf	Download