Helmholz 700-770-8MD41 SSW7-TS PRO, MPI/PROFIBUS-Adapter mit Modem analog, inkl. Hutschienenadapter

  • Helmholz 700-770-8MD41 SSW7-TS PRO, MPI/PROFIBUS-Adapter mit Modem analog, inkl. Hutschienenadapter

Helmholz 700-770-8MD41 SSW7-TS PRO, MPI/PROFIBUS-Adapter mit Modem analog, inkl. Hutschienenadapter

Codice: 700-770-8MD41
Marchio: Helmholz

The SSW7-TS PRO enables remote maintenance of an S7 system over a modem connection and supports connecting to an MPI or PROFIBUS network with up to 12 Mbps on the system side.

An analog modem is integrated in the housing of the SSW7-TS PRO. The analog modem can be configured for use worldwide. In addition to use as a remote maintenance solution, the SSW7-TS PRO can also be used as a PC adapter on-site with its RS232 or USB interface. Due to the integrated repeater, the MPI/PROFIBUS connecting cable of the SSW7-TS PRO is not a stub. This means the adapter can be plugged at any point along the bus even at 12 Mbps.
Power is supplied to the SSW7-TS PRO through the MPI/PROFIBUS connecting cable or on demand via the external voltage connection


General information
Order number700-770-8MD41
Article nameSSW7-TS PRO, MPI/PROFIBUS adapter with modem analog
Scope of deliverySSW7-TS PRO, DIN rail adapter, 2 x telephone cable RJ11 + TAE, 3 m each, 3 m programming cable, USB cable, manual, CD with software
Dimensions (DxWxH)130 x 67 x 30 mm
Weightapprox. 240 g
Supply voltage24 V DC, 18...30 V
Current drawapprox. 130 mA
MPI interface
TypeRS485
Transmission rate9,6 kbps...12 Mbps
ConnectionSUB-D, 9-pin
with PG interface and terminating resistor
Communication interface
Number1
TypeRS232; 2-wire dial-up line; USB
Transmission rate9,6...115,2 kbps
Transmission typeAsynchronous serial / USB
ProtocolPC <-> S7
via Modem or local
ConnectionConnector, SUB-D, 9-pin;
RJ11;
Mini-USB connector
Protection ratingIP 20

Helmholz Datasheet

Paese e lingua Nome del file Link di download
United States (English) Helmholz-EN_42334.pdf Download

Richiedi un preventivo

Top