Zander Aachen ZLS Safety Rope Switch

  • Zander Aachen ZLS Safety Rope Switch

Zander Aachen ZLS Safety Rope Switch

Code: ZLS
Marque: Zander Aachen

Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.

Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.

With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.

ZLS
ApplicationsProtection of large hazardous zones, e.g.
conveyer belts, extrusion plants and cutting machinery
Certified according toIEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1,
EN 60204-1, ISO 13850
ApprovalsCE, TUV
Safety contacts3 NC / 1 NO
Contact rating, minimum load currentAC-15: 3 A / 240 V; DC 5 V / 10 mA
Typical operating force, rope pulled< 125 N
Rope spans80 m
Ambient temperature-25 °C to +80 °C
LEDDC 24 V
Red flashing or steady - unsafe condition
Green steady - safe condition
HousingDie-Cast, painted yellow
IP RatingIP67
Mechanical reliability1.5 x 10⁶ operations
Approx. weight820 g

Zander Aachen Fiches techniques

Pays et langue Nom du fichier Lien de téléchargement
United States (English) Zander-Aachen-EN_42085.pdf Télécharger

Demande de devis

Top