Stego FZK 011 Mechanical Thermostat

  • Stego FZK 011 Mechanical Thermostat

Stego FZK 011 Mechanical Thermostat

Código: FZK 011
Marca: Stego

Switch temperature difference 5K (-3/+2K tolerance)¹
Sensor element thermostatic bimetal
Contact type change-over snap-action contact
Service life > 100,000 cycles
Min. switching capacity 10mA
Max. switching capacity, NC 250VAC / 120VAC, 10 (4) A
DC 30W
Max. switching capacity, NO 250VAC / 120VAC, 5 (2) A
DC 30W
Max. inrush current AC 16A for 10 sec.
Connection 4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 38mm
Weight approx. 0.1kg
Fitting position variable
Operating/Storage temperature -45 to +65°C (-49 to +149°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
Approvals UL File No. E164102, EAC

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.

² When connecting with stranded wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Art. No. Operating voltage Setting range
01170.0-00 230VAC +5 to +60°C
01170.0-01 230VAC +40 to +140°F
01170.0-02 230VAC -20 to +35°C
01170.9-00 120VAC +40 to +140°F
01170.9-01 120VAC +5 to +60°C

Stego Hojas de Datos

País e Idioma Nombre del Archivo Enlace de Descarga
United States (English) stego-EN_54310.pdf Descargar
Deutschland (Deutsch) stego-DE_71351.pdf Descargar
Italy (Italiano) stego-IT_60429.pdf Descargar

Solicitar una Cotización

Top