Helmholz 700-671-PNC01 PN/CAN gateway, PROFINET/CAN Layer 2

  • Helmholz 700-671-PNC01 PN/CAN gateway, PROFINET/CAN Layer 2

Helmholz 700-671-PNC01 PN/CAN gateway, PROFINET/CAN Layer 2

Code: 700-671-PNC01
Marke: Helmholz

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus.
The I/O data of the CAN participants is transparently displayed in a freely configurable manner on the PROFINET network and can thus be processed directly in the PLC. The PN/CAN gateway is integrated with a GSDML file in the hardware configurator and can be fully configured there. No other software tools for configuration or handling blocks for programming are necessary, making gateway use straightforward.
The features of the PN/CAN gateway are rounded out by MRP (media redundancy), as well as extensive diagnostic functions and an interface for online diagnostics.

With the Layer 2 PN/CAN gateway, CAN devices can be connected using proprietary CAN protocols, including devices with the SAE J1939 protocol, among others.

General information
Order number700-671-PNC01
Article namePN/CAN gateway, PROFINET/CAN Layer 2
Scope of deliveryPN/CAN gateway, Quick Start Guide, CD with GSDML file and manual
Dimensions (DxWxH)35 x 84 x 76 mm
WeightApprox. 160 g
PROFINET interface
Number1
ProtocolPROFINET IO as defined in IEC 61158-6-10
Physical layerEthernet
Transmission rate100 Mbps
I/O image sizemax. 1440 bytes of input / 1440 bytes of output data
ConnectionRJ45 socket
FeaturesMedia Redundancy Protocol (MRP), automatic addressing / topology detection (LLDP, DCP)
CAN interface
Number1
TypeISO/DIN 11898-2 CAN High-speed physical layer
Transmission rate50, 100, 125, 250, 500, 800, 1000 kbps
ProtocolCAN Layer 2 with 11 bit or 29 bit identifier
Connection9-pin D-sub male connector
FeaturesAutomatic and controlled reception and transmission objects, reception channel FIFO, transmission channel FIFO
USB interface
ProtocolFull-speed USB 2.0 device
ConnectionMini-USB
Isolation voltage1.5 kV
Electrical isolationYes
Status indicator3 LEDs, function status
4 LEDs, Ethernet status
Voltage supply24 V DC, 18–30 V DC
Current drawMax. 250 mA with 24 V DC
Ambient conditions
Ambient temperature0 °C ... +60°C
Transport and storage temperature-20 °C … +80 °C
Relative air humidity95 % r H without condensation
Pollution degree2
Protection ratingIP20
CertificationsCE
CE
RoHSYes
REACHYes

Helmholz Datenblätter

Land Und Sprache Dateinamen Link Herunterladen
United States (English) Helmholz-EN_42334.pdf Downloaden

Fordern Sie ein Angebot an

Top