Helmholz 700-600-CAN12 CAN 300 PRO, USB programming cable

  • Helmholz 700-600-CAN12 CAN 300 PRO, USB programming cable

Helmholz 700-600-CAN12 CAN 300 PRO, USB programming cable

Code: 700-600-CAN12
Marke: Helmholz

The CAN 300 PRO module, for use in an S7-300* from Siemens, enables connection of CAN participants with the automation device.

The module can be plugged into either the central frame or the expansion frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) frames with a freely selectable transfer rate from 10 kbps to 1 Mbps.
The CAN 300 PRO can send and receive CAN telegrams in Layer 2 mode. In the CANopen master mode, the data of the CANopen slaves can be processed as a process image table in the PLC.
Use as a CANopen slave is also possible. For standard applications, such as motor control with CANopen, application examples are available. In addition, handling blocks for the SAE J1939 protocol are available.
There are 16 freely settable timers available in the CAN 300 PRO. Each timer can trigger a freely programmable CAN telegram. This means the synchronous protocols widely available in drive and servo control are easy to implement using the CAN 300 PRO.
A DIP switch for setting the transfer rate and station address facilitates commissioning. An optional Micro memory card stores the project. In this way, replacement of the parameterization or the module during servicing can be carried out quickly.
6 LEDs indicate the operating status of the module. There is a USB interface for diagnostics and parameterization.
The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.
A USB programming cable is included in the delivery.

  • Layer 2, 11 bit and 29 bit (CAN 2.0A/B)
  • CANopen® master on the module
  • DIP switches for address + transfer rate
  • Memory card for project backup (optional)
  • USB interface for parameterization and diagnostics
  • Extensive CAN bus diagnostics possibilities
  • Can also be used as CANopen® slave
  • Extended ambient temperature
  • General information
    Order number700-600-CAN12
    Article nameCAN 300 PRO
    Scope of deliveryCAN 300 PRO, USB programming cable
    Dimensions (DxWxH)116 x 40 x 125 mm
    WeightApprox. 280 g
    CAN interface
    Number1
    TypeISO/DIN 11898-2 CAN High-speed physical layer
    Transmission rate10 kbps ... 1 Mbps
    ProtocolCAN 2.0A (11 bit)/CAN 2.0B (29 bit) Layer 2
    CANopen® Master/CANopen® slave
    SAE J1939
    DeviceNet slave (upon request)
    ConnectionConnector, SUB-D, 9-pin
    Status indicator6 LEDs
    Configuration interface
    TypeUSB 1.1
    ConnectionUSB B socket
    Voltage supply+5 V DC via backplane bus
    Current draw
    Current draw typical160 mA
    Current draw maximal190 mA
    Ambient conditions
    Ambient temperature-25 °C … +60°C
    Transport and storage temperature-25 °C … +75 °C
    Pollution degree2
    Protection ratingIP20
    CertificationsCE
    CE
    RoHSYes
    REACHYes

Helmholz Datenblätter

Land Und Sprache Dateinamen Link Herunterladen
United States (English) Helmholz-EN_42334.pdf Downloaden

Fordern Sie ein Angebot an

Top